This document has to be prepared jointly with process eeer when developing the P&ID since these details are required for pipe line numbering and is referred to by all stake holders and in particular by the instrumentation eeer who is involved in generation of P&ID.PMS is the master document for finalizing the specification for pipes, valves, fittings, flanges, gaskets and fasteners and also for selection of MOC , rating and end connections of field instruments like control / safety valves, flow meters, transmitters etc. Hence, this document has to be generated diligently to ensure accuracy as this impacts the procurement process and has cost implications. This document is essential for input in the Legends & Symbols sheet created for the project.This course gives a step by step approach for generation of this critical document, the codes and standards to be referred and gives samples of detailed templates to be prepared. Preparation of this document is done in consultation with Process eeer or Process consultant. An accurate PMS is a must for all projects since this impacts the procurement as the inter connection with piping and instrumentation is involved and has to be coordinated to ensure proper installation of all instruments.

Overview

Section 1: Introduction

Lecture 1 Introduction

Lecture 2 PMS-Reference documents, drawings and standards

Lecture 3 PMS Generation-Activity sequence

Lecture 4 Identify material standards

Lecture 5 Flange Pressure Rating

Lecture 6 Branch Connection Standards

Lecture 7 PMS Chart and Conclusion

Fresh mechanical / Piping eeers in EPC companies executing chal projects

HomePage:

Https://anonymz.com/https://www.udemy.com/course/piping-material-specification-pms/

DOWNLOAD
1dl.net


uploadgig.com


rapidgator.net